Appro WH300 User's Guide download pdf (Page 8)

Rev. 2.0

1/23/06

Appro WH300 User’s Guide 7

2.3 Checking the Power Cord

CAUTION

To avoid electrical shock, check the power cord(s) that will be used with the product:

 Do not attempt to modify or use the AC power cord(s) if they are not the exact type

required.

 If a power cord is not compatible with the AC wall outlet in your region, get one

that meets the following criteria:

⎯ The power cord must be properly rated for the AC voltage in your region.

⎯ The power cord plug cap must have an electrical current rating that is at least

125% of the electrical current rating of the product.

⎯ The power cord plug cap that plugs into the wall socket-outlet must have a

grounding-type male plug designed for use in your region.

⎯ The power cord must have safety certifications for your region, and shall be

marked with the certification markings.

⎯ The power cord plug cap that plugs into the AC receptacle on the power

supply must be an IEC 320, sheet C13, type female connector.

⎯ In Europe, the power cord must be less than 4.5 meters (14.76 feet) long, and

it must be flexible <HAR> (harmonized) or VDE certified cordage to comply

with the chassis’ safety certifications.

 The power supply cord(s) is the main disconnect device to AC power. The socket

outlet(s) shall be near the equipment and shall be readily accessible for

disconnection.

2.4 Earth-Ground Socket Outlets

CAUTION

To avoid electrical shock, the system power cord(s) must be plugged into socket-

outlet(s) that is provided with a suitable earth ground. The system will be provided

with the following marking:

Connect only to properly earthed socket outlet.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 36 37

No comments

Appro WH300 User's Guide Page 8